What Is Scraper Winch

The scraper winch is mainly used for ore handling and filling in the pit or open air of metal mines and other mines. Mainly used for horizontal rake, also can be used for slope rake with low inclination, can not be used as lifting equipment. The driver can be operated by hand beside the winch, or by pushing buttons from several meters to tens of meters away from the winch.

The scraper winch harrows materials by means of the wire rope wound on the drum to pull the rake bucket for round trip kate005 movement.

The scraper winch consists of winch, rake bucket and pulley.

Scraper winch is mainly used in metal mines and other mines pit and open places, in the horizontal and slope of the working surface is not large for the mineral rake and filling work.

Scraper winch is mainly composed

The scraper winch has a reduction gear, main drum, secondary drum, control device, rope guide device and motor. These parts are respectively installed inside and outside the shell, the shell is yi have a good steel parts, not only to protect, support, and bear all the load. It is bolted to two slides connected to the foundation. The double-drum winch has yi main drum (mounted on the right side, i.e. the yi side near the motor) and yi secondary drum (mounted on the left side). The three-drum winch has yi main reels (mounted in the middle) and two secondary reels (mounted on the left and right). The three-drum winch can also be fitted with two main reels (on the right and in the middle) and yi secondary reels (on the left), each of which has a corresponding yi control device and a steel rope guide device.

Classification and model significance of scraper winch products

The scraper winch models are 2jpb-7.5, 2jpb-15, 2 jpb-22, 2 jpb-30.

Introduction to the scraper winch (taking 2jpb-7.5 as an example) :

2: Quantity of steel wire rope drum; J: winch class; P: scraper winch; B: explosion protection; 7.5: motor power.

Parameter of scraper winch