Small Crane Detail Installation Method

Small crane in our life is also a common lifting machinery, small crane can be applied to household, construction sites, etc., but small crane installation method you may not know, today to everyone by every step to introduce the small crane installation method, I hope to help you!

Step 1

First of all to select the small crane installation operation position, say a piece of 300x120x30 hardwood fixed on the top of the bar cap, if the installed floor smooth but also equipped with power box liner, you can carry out the small crane installation.

Step 2

Place the power box near a window or balcony (place a flexible pad under the power box if the floor is smooth).

Step 3

Assembly bracket part

Place the jack nut washer on the jack nut;

The force rod is inserted into the screw;

Place the bearing on the pole clamp;

The rotating arm is mounted on the vertical rod bearing;

The wooden top of the pole is placed at the top of the pole.

Step 4

Insert the assembled support part into the base hole of the power box.

Step 5

Add proper amount of lubricating oil to screw screw and tighten jack nut. (note: the main strut must be perpendicular to the ground.)

Step 6

Adjust the height of the rotating arm of the small crane to make it suitable, and then adjust the length of the steel wire rope of the pulling arm to fit the lifting object.

Step 7

Use the clutch handle to pull the clutch out of the state, take out the wire rope from the power box, loosen the screw rope lock above the two pulleys, pass the wire rope through the two pulleys on the bracket, and then lock the wire rope lock.

Step 8

Remove the power cord, push button starter and trip switch, and install the trip switch in the arm end fixing box.

Step 9

Power on the empty load test machine, check whether the start switch is flexible, the limit, the trip switch is reliable.

The above nine steps are small crane installation method steps, I hope to help those who just enter the technician, about the small crane installation method to stop here. More professional questions, please feel free to leave a message online!!