Placement of pneumatic scraper winch after use

At present, there are many newly developed mines in China, so the use of mining equipment will increase. Many old equipment can no longer continue to use pneumatic such as scraper winch, such as equipment are commonly used in the mine equipment, so in the face of so many problems how can we make pneumatic scraper winch get more applications?

At present, there are many newly developed mines in China, so the use of mining equipment will increase. Many old equipment can no longer continue to use pneumatic such as rake winch, such as equipment are commonly used in the mine equipment, so in the face of so many problems how can we make pneumatic rake winch get more applications?

Shandong China Coal pneumatic scraper winch is a key mechanical equipment for cleaning the impurities on the surface of liquid aluminum in the mixing tank. General electric rake process, is an important process before continuous casting aluminum ingots, the purpose is to clear aluminum electrolytic aluminum residual alumina residue, and then continuous casting, so as to ensure the purity of aluminum ingots scraper winch.

The construction of the mine is inseparable from the pneumatic scraper winch, which shows the importance of the scraper winch. It can be said that it plays a very important role in the development of mining industry. It mainly has these kinds of structural devices, including deceleration device, main drum, auxiliary drum, control device, steel rope guide device and motor. These components are respectively mounted inside and outside the shell. In addition, when the motor of the scraper winch is started, when the internal gear is not locked, the internal gear is rotating, the drum is not moving under the action of the steel rope and the rake bucket; One of the internal gears is locked by the control device, so its corresponding reel will rotate the winding rope, and also drive the rake bucket to move. At this time, the other gear is not locked, and its reel will be driven to release the rope under the active action of the steel rope. The operating brake locks the internal gear of the main and auxiliary drum in such a way that the rake bucket makes reciprocating motion to carry the rake.

How to place the pneumatic scraper winch after use?

(1) park the pneumatic scraper winch in a safe place where there is no pine stone, no water drop, no patio span collapse, no blasting operation damage, etc.;

(2) reset each joystick, put the moving arm to the bottom, turn the bucket down and touch the ground;

(3) put the stop lock in the lock position;

(4) disconnect the power switch and main power switch on the vehicle. Stop the loader on the level ground. If it stops on the slope, wedge the wheel with triangular wood or stone.

(5) drag the harrow winch, in addition to the normal towing or pull rod to add a safety chain or wire rope, long distance traction, must disconnect the drive system.