How To Improve The Working Efficiency Of Scraper Winch

Scraper winches usually have three actions: lifting, driving and turning. In operation, these three movements are generally carried out separately, that is, when the hook moves up and down and the concave movement is not simultaneous, the time taken by a working cycle is long and the efficiency is low. If the three actions are carried out at the same time, the time will naturally shrink so that the working efficiency of the crane can be improved ...

Scraper winches usually have three actions: lifting, driving and turning. In operation, these three movements are generally carried out separately, that is, when the hook moves up and down and the concave movement is not simultaneous, the time taken by a working cycle is long and the efficiency is low. If the three actions are carried out at the same time, the time will naturally be shortened so that the working efficiency of the crane can be improved. This is the advanced operation method of the crane.

How To Improve The Working Efficiency Of Scraper Winch?

For example, when it is decided to rake a mine winch somewhere to lift an object on the ground, the fast-moving interrogation team can rotate the crane to the desired position and quickly lower the hook. Of course, it is not easy to manipulate three controls at a time. But as long as the driver is familiar with the operation technology and masters the characteristics of the crane, it is not difficult to achieve the purpose of improving the working efficiency than shortening the cycle.

When lifting an object, it is required to stop the hook on the upper part of the object to be lifted. For this purpose, use a large and small truck to "align". It is easier to locate the cart, because the hook is almost directly in front of the driver. The position of the car is parked or not. Observe the live wire rope while raising the wind. If the rope on one side of the hook is stressed first, and the rope on the other side is stressed later, it means that the hook deviates and should move the trolley toward the rope first. When the ropes on both sides are equal, the position of the team's trolley stops .