Operating Rules Of The Rubber Paver Machine

1. The operator of the rubber paver machine must undergo professional training, understand the mechanical properties, structure, master maintenance knowledge, and proficiently master the performance of the machine, operating essentials and safety items, and be confirmed by the relevant departments before they can operate alone.

2. Before starting the engine, you must check: whether the amount of oil (oil, fuel, working oil, lubricating oil) is sufficient, the belt tightness on the fan, whether there is oil leakage and loose parts. Check whether all kinds of accessories, accessories, tools, etc. required for the work of the day are complete.

4. The material transport vehicle must be directed by someone to discharge the material into the hopper of the machine accurately.

5. Before the paver works, you must get in touch with the left and right leveling personnel to ensure that other personnel are not in the work before they can work.

6. When shifting from the working gear to the driving gear, it must be carried out at low throttle, after the machine is completely stopped, and all working parts stop working.

7. Operators are strictly forbidden to operate after drinking, and must wear neatly when operating the equipment, no slippers, smoking, eating and other activities that hinder safe operation.

8. After the paver is working, all protective devices must be installed at the designated position.

9. The operating room (station) must be kept clean, clean up oil and other dirt in time, and tools and other items must not be placed randomly.

10. Before the driver leaves the operating platform, all operating mechanisms must be set to the "0" position.

11. When widening the hydraulic automatic widening paver, you must pay attention to and observe the surrounding conditions to avoid hurting people and damaging the equipment.

12. When the paving is heated by liquefied gas tanks, the tank valve must be closed in the event of flameout or fire. When the ambient temperature is higher than 200C or when the air tank of the car is directly exposed to the sun, the air tank is used for heating, and the air tank must be covered.

13. After the paving is finished, the screed must be placed on the skid when the cleaning material is transported, the tamping device, and when the machine is stopped. The machine must not hinder the traffic when it is parked, and warning signs should be placed. Run the engine idling for 5 minutes and then turn off the engine, then cut off the power and lock the instrument panel.

14. Equipment maintenance must be carried out in accordance with the requirements in the manual.

15. When repairing and maintaining equipment, you must:

(1) The hopper and screed are firmly fixed.

(2) The engine stalls.

(3) When repairing the hydraulic system, the residual pressure of the hydraulic system must be released