Summarize The Operating Requirements Of The Rubber Paver Machine In Some Projects

Everyone should pay attention to the safety issue, both in the project and outside the project. We in China Coal have summarized some safety measures for operating rubber paver machine in the project, and hope you can do it well in the project. The driver's platform and work site of the paver machine should have a wide view and clear out all obstacles that hinder the work.

Irrelevant persons shall not stay on the bridge when the paving operation is stopped. Drivers are not allowed to leave their posts without authorization; when unloading materials to the paver, the truck should act in harmony and move synchronously to avoid collisions; shift gears must be stopped when the paver machine is completely stopped, and it is strictly forbidden to shift gears and ramps. Shift gears or coast to neutral.

When preheating the paver screed, the heat should be controlled to avoid deformation due to partial overheating. During the heating process, a special person must be guarded; the paver should be driven smoothly and should not be turned sharply. When stopping the curve operation, the distance between the end of the ironing installation and the curb shall not be less than 10cm to avoid collision.

When cleaning the rubber paver machine with diesel fuel, do not approach an open flame. There is always nothing wrong with being cautious, and it doesn't matter when there is nothing wrong, but if you are not afraid of ten thousand, you are afraid of anything. I hope you can remember all the above safety measures, safety first.