How To Ensure The Efficiency Of The Rubber Paver Machine In The Low Temperature Environment

The paving of the pavement inevitably stops in winter, so the use of the rubber paver machine in winter is also unavoidable. However, when the temperature is low, the equipment is easily affected by the low temperature environment and causes a certain level of damage. Therefore, in order to ensure that the equipment is For efficiency in low-temperature environments, we need to control certain cold protection measures to reduce equipment damage.

For the maintenance of the engine, choose the antifreeze that is suitable for the local temperature and change it every 1 year. Before winter comes, change the winter fuel for the rubber paver machine in advance to prevent the formation of ordinary diesel oil from waxing in the filter element and pipeline due to low temperature, which will cause the spread The starter of the paving machine cannot start normally, turn on the anti-icing installation of the compressed air system and regularly check the ether level.

Many initiators need to add some additional additives in the coolant, namely SCA (Supplementary Coolant Additive), which usually acts on the contact between aluminum parts and coolant, so as to more effectively avoid metal corrosion and minerals. For precipitation, cylinder liner cavitation and foaming, please start the paver engine once every half a month to charge the battery.

Run all hydraulic actuators at the same time, such as rotating hydraulic motors, telescopic cylinders, etc. Do not remove the battery from the machine to avoid the problem of losing the internal software program of the controller when the equipment is parked for a long time. The hydraulic system regularly starts and turns on the paver. All the hydraulic functions on the machine allow the hydraulic drive components to work regularly to avoid damage to the related seals due to long-term parking and corrosion of metal components such as cylinder rods.

Try to shrink all the cylinder rods into the oil cavity of the hydraulic cylinder to better maintain the appearance of the cylinder rods. The parts should be maintained before the paver is parked for a long time in winter. The mechanical hinge points and bearings should be smoothly maintained. Check the integrity of the dust cover of each mechanical part, and replace the damaged seal in time. The metal contact surface exposed to the air should be treated with rust prevention.