Cement Mixer Operating Procedures

1. Before mixing the Cement mixer, it shall be operated in an empty vehicle.

2. Adjust the timing of the time relay according to the stirring time, and pay attention to the adjustment in the case of power failure.

3. Water wet mixing cylinder and blade and site.

4. If electrical or mechanical faults occur in the process of Cement Mixer, part of the mixing material should be unloaded to reduce the load and then start the mixer after troubleshooting.

5. When operating and using, it should be checked frequently to prevent safety accidents such as electric shock and mechanical injury.

6. After the test, turn off the power supply, clean up the mixing cylinder and the site, and clean up.