How to make cement mixer withstand high temperature in summer

When driving in summer, be sure to check the water temperature gauge to see if the water tank is short of water. If it is found that the pointer of the water temperature gauge is close to the red line during driving, the speed shall be reduced as soon as possible and the cement mixer shall be turned to a cool place to stop. To avoid damaging the engine, do not shut down the engine immediately after stopping, but let the engine idle for a period of time.

If the water temperature still does not drop, please shut down the car and check the engine coolant. But be careful not to open the water tank cover immediately, otherwise it is easy to be scalded by steam. If the coolant is insufficient, please replenish it first. If the water temperature is too high, do not let the cement mixer drive for a long time, because driving for a long time under abnormal water temperature will cause great damage to the engine; Don't slow down, especially on congested roads.If you want the cement mixer to withstand the high temperature in summer, you need to do something to help you.

Due to the high temperature, if the tire quality is not good enough or the tire pressure is too high, the gas in the tire will expand, causing a tire burst. Therefore, it is recommended to reduce the tyre pressure by 10% to 2.2 kPa. In this season, more attention should be paid to tire maintenance. If any damage is found, it shall be repaired or replaced in time. If the tire has a patch, it is better to put it on the rear wheel or use it as a spare tire. In addition, in summer, be careful not to let the tires of cement mixer collide with obstacles, because it is easy to damage the sidewall of the tires, causing hidden dangers.

If a tyre burst occurs during driving, the driver should firmly control the steering wheel with his hands and slowly step on the brake to make the cement mixer slow down and stop steadily. Do not brake suddenly, because it is easy to cause tailspin or even rollover.

In order to prevent spontaneous combustion of the cement mixer, the basic method is to regularly maintain the cement mixer and check whether the engine, circuit and oil circuit are aging and leaking. Do not repair or refit vehicles in non-standard workshops, because some wrong operations, such as pulling wires at will, or not effectively fixing places prone to friction, may cause danger. If the vehicle is refitted, especially the lights and stereo, a comprehensive inspection should be carried out.

If you want the cement mixer to withstand the high temperature in summer, you need to do something to help you