Daily Maintenance Of Forklift Truck

The proper use and maintenance of the forklift truck will extend the service life of the forklift, reduce the failure rate and improve the efficiency.
1 clean the forklift truck every day and paint;
2 check the work of oil, fuel, water leakage;
3 water tank inspection;
Remove the tank cover, through the observation hole. If the coolant level is maintained, then the water tank cover is re – installed. Such as the height of the liquid level, you need to add water. Pay attention to add water, not of dirty water. Special attention should be paid to prevent the heat and steam out of the water when the water tank is checked.
4 air filter check
Using compressed air to blow dust or dirt, that blow from the inside to the outside; check the folding part is damaged.
5 pipeline and oil cylinder inspection;
Check the hydraulic line and three cylinder if there is oil leakage on the forklift truck.
6 block shelf (door frame) inspection
Remove the cover gas and oil level check whether in scale. Check the retaining rack (door frame) and the fork bracket mounting bolt, such as loose, you should tighten it.
7 battery electrolyte check
To observe whether the battery electrolyte is in the battery box body, such as in the calibration line, then add electrolyte, but not exceed the scope of the calibration line.
8 check the engine oil level
Taking the diesel oil dipstick, wipe after insertion, and then taking the oil to observe the oil level, the oil level should be the scale between. When checking the oil level, if it is cold oil, it can not correctly reflect the level