Let''s Descripe Some Important Machine Used In The Road Marking Project(2)

Yellow Line Road Marking
Yellow lines are mostly used in a two-way road as a separator, in the middle of a road. Vehicles are not permitted to cross this yellow line. Sometimes it is also used on the side of a path indicating the parking and waiting at that area is prohibited. They divide the traffic flow in the opposite direction and define the pavement edges.
Air Blower Machine for Road Marking Preparations
Air blower machine is used to remove dust particles from the road by throwing pressurized as air on the road. This process removes dust particles from the road and thus increases the strength of paint as the material sticks directly to the road. Road cleaning machine also does the same job of removing outside matter from the road and preparing it for the road marking process.
By the coating used, road marking machines can be classified into categories like thermoplastic paint, cold plastic paint, and two-component paint type. The thermoplastic material is used hot and contains good durability and is suitable for all type roads. Cold plastics contain single or multi-component forms. This paint gets laid on a carriageway and a chemical activity forms a cohesive film. Regular hot and cold paints are formulated to make bonding with the road surface, and it holds glass beads, immediately thrown over the wet paint. Every machine of this type contains a rod as a hydraulic guide that ensures the accuracy and straightness of painting line. Before marking the road, a pre-marker is used to mark lines to increase accuracy.
Waterline Marking Machine for Road Marking Preparations
Waterline paint is used for striping and adds beads of glass for reflectivity. A striping truck is used for applying this. The thermoplastic resin is used while marking special pavements marks. Most highway constructions use thermoplastic type marking method, but cold plastic road marking is also used for the same as it also acts as a thermoplastic resin.