How To Use a New Wet Shotcrete Machine ?

Wet shotcrete machine is a mechanical device vegetation greening, mainly used for highway slope greening, green mine, desertification control, slope protection, governance, mountain landfill treatment engineering. Operation steps of the new wet shotcrete machine: A wet shotcrete machine, in operation before the main valve before and after the end of the valve closed, then the main valve cover with a screw loose fittings, pressure release valve. Two, will remove all the screws, including nuts, the necessary control of brass, take the valve cover and spring, the shaft core, diaphragm, piston, do not damage membranes, take these things out, check the diaphragm and the O-ring for damage; if no damage occurs, then divided into their own struggle the the internal parts. Three, such as the discovery of the diaphragm or mid ring is damaged, please axle nut loose on the core, gradually decomposed patch or ring, out again after the patch or a new o-ring. Four, to a detailed view inside the main valve seat, such as whether there is damage to the shaft core, if other debris within the main valve to clean out, by the reverse is the order of replacement parts combination of the main valve installed, the valve can not have card phenomena. Five, please refer to installation to attention again to use.