Detailed Operation Of Feeding A Shotcrete Machine 

Let's introduce the exact procedure of feeding a shotcrete machine
1, The prototype made in attendance Restructuring seat body, in which the body and then add a section attendance to the mounted accelerator hopper and a round screen, there is a semi-enclosed and open to the discharge port.
2, Accelerator funnel fixed superstructure middle bucket lid can be opened, before running the accelerator bag upside down on the hook bucket lid, accelerator can fall freely under the wing rotating dial material will quick-setting agent dial to the bottom edge of said bucket overflow, the quantity can be adjusted gauge adjustment.
3, Round sieve sieve and set aside by the wing material composition, sieve uniform circular hole of 20mm diameter, taper hole blanking easy, diameter greater than 20mm classifying stone according to incoming cases, the discharge interval, sieve under the spring can produce vibrations, so set aside chunks of material stuck without wings, wings once when dialing material cards, insurance sales Jibei sieve bottom cut off, so that the body be protected, to be shut down to remove the large pieces, put the pin back, you can resume operation.