The Maintenance Requirements Of Concrete Shotcrete Machine

The service life of shotcrete machine is to do maintenance work. But extend the service life of concrete spraying machine, only to do maintenance work is not enough, but to adhere to the three points by mending, rely on seven minutes to raise, this is to guarantee the service life of Dry mix shotcrete machine. 1, Adjust the place After working for a period of time, wear rings, glasses plate components will inevitable friction, and a gap is formed, this time on the need to manually adjust about the homing. 2. Check hydraulic components on time The hydraulic element refers to a number of components that are associated with the pressure system, including fuel tank, safety valve, oil pipe, etc., if these parts are to be dealt with immediately. 3. Add lubricating oil in time Lubricating oil is necessary for Concrete shotcrete machine, it is difficult to smooth operation of the machine if not lubricating oil. And the forced operation will damage the machine. In addition, it will cause the machine to wear, if the oil is not clean enough. Therefore, be sure to check whether the oil is clean and added in general maintenance. 4. Ensure the fastening of the link Bolt loose will cause damage to the machine, life reduction. Therefore, it is timely to check whether the installation of the bolt is strong in the maintenance process. Check the draw bar, site of the discharge port etc.