Quick Instructions For Spraying Machine

1. Connect the power supply, start the main motor by jog to test the forward and reverse rotation, and turn in the direction of the arrow. Pay attention to jog start, that is, turn off as soon as it is turned on. The machine is strictly prohibited from reversing and idling for a long time.

2. Install the shotcrete pipe, add water to the hopper, start the machine and lubricate the pipe with water.

3. Add material to the hopper, pull the other end of the sandblasting pipe into the hopper, let the machine circulate and discharge the material for a few minutes, then install the spray gun, connect the air pipe to spray, and stop the machine for more than 20 minutes to let the machine circulate the discharge , To prevent sand precipitation from blocking pipes,

4. To clean after use, add water directly to the hopper of the machine, turn on the machine and fetch water until clear water comes out. After the cleaning is completed, it is best to use pure cement slurry for the first use every day to prevent the remaining sand in the pipeline from blocking the pipe.

The new generation of shotcrete truck fundamentally solves the shortcomings of "low efficiency, high energy consumption, high resilience, and high pollution". Not only that, the automation system is more convenient to operate, and it can move forward and backward freely in engineering operations, thus avoiding lifting with a loader The trouble and time-consuming length of Chengdu.