If You Want The Cement Mixer To Withstand High Temperature In Summer, You Need To Do A Few Things To Help

When driving in summer, always check the water temperature gauge to see if the water tank is short of water. If you find that the pointer of the water temperature gauge is approaching the red line during driving, you should reduce the speed as soon as possible and drive the cement mixer to a cool place to stop. To avoid damage to the engine, do not shut down the engine immediately after parking, but let the engine idle for a period of time.

If the water temperature still does not drop, turn off the car and check the engine coolant. But be careful not to open the water tank cover immediately, otherwise you will be easily scalded by the steam. If it is because of insufficient coolant, make up first. If the water temperature is too high, do not let the cement mixer drive for a long time, because the long-term driving under the condition of abnormal water temperature will cause great damage to the engine; also do not slow down, especially do not choose a congested road section

Due to the high temperature, if the tire quality is not good enough or the tire pressure is too high, the gas in the tire will expand and cause a tire blowout. Therefore, it is recommended that you reduce the tire pressure by 10% to 2.2 kPa. In this season, more attention should be paid to the maintenance of tires. If damage is found, it should be repaired or replaced in time. If there is a patched tire, it is best to put it on the rear wheel or as a spare tire. In addition, in summer, be especially careful not to let the cement mixer tires collide with obstacles, because it is easy to damage the sidewall of the tires and cause hidden dangers.

If a tire blowout occurs during driving, the driver should control the steering wheel tightly with his hands and step on the brake slowly to make the cement mixer smoothly decelerate and stop. Do not brake suddenly, as this can easily lead to a tail-flick or even a rollover.

To prevent the cement mixer from spontaneous combustion, the basic method is to regularly maintain the cement mixer, check the engine, circuit and oil circuit to see if there is any aging and oil leakage. Do not repair or modify vehicles in non-standard shops, because some wrong operations such as pulling wires randomly, not effectively fixing friction-prone places, etc., will cause danger. If it is a modified car, especially the lights, audio, etc., it should be checked in an all-round way.